Features:
1) High sound pressure output;
2) Power supply: 5V;
3) Standby current: less than 60uA;
4) UART auto-output;
5) PWM controlled output;
6) Digital output;
7) Transmission-receiving enclosed sensor with long cable;
8) Center frequency: 40KHz;
9) Temperature compensation;
10) Working temperature: -15 degree centigrade to +60 degree centigrade;
11) Storage temperature: -25 degree centigrade to +80 degree centigrade;
12) Measurement accuracy: +/-1cm + (S*0.3%) (S is measured value);
13) Electrostatic protective design, the enclosure of sensor and the I/O pin are added the electrostatic protection device, up to the standard of IEC61000-4-2;
Advantage:
1) High degree of protection;
2) Strong anti-interference;
3) Data output, stable and reliable;
4) Lower power dissipation;
5) Fast response time;
6) Strong antistatic;
7) Wide working temperature;
8) High measurement accuracy;
9) Small bulk and easy to install;
10) Auto-output distance value, release the processor of user;
11) With controlled output mode, could minimize power consumption according to the actual application;
Note:
1) The typical data of work cycle with 100ms;
2) Above measured data are from the plane of carton with 50cm * 60cm;
3) The enclosure of sensor and the I/O pin are up to the standard of IEC61000-4-2
4) a, when the environment temperature is in 0-39℃, the maximum value of humidity is 90%(no condensation);
b, when the environment temperature is in 40-50℃, the maximum value of humidity is the high humidity in
the natural world under current temperature(no condensation);
There are three output modes: PWM, UART
and digital output, which corresponding item number are:
DYP-ME007YS-PWM V1.0
DYP-ME007YS-TX V1.0
DYP-ME007YS-KG V1.0
Please kindly advise which output mode you needed before purchasing order (our default output mode is PWM).